ALUCAST

Alucast is an aluminium die-cast panel of great strength. Alucast is suitable for industrial and high-tech clean room installations, and for rooms with non-magnetic requirements.
The panel is suitable for all the soft coverings normally used for access flooring.

Access floor panel

Composition :
The Alucast panel is made up as follows :

- A top distributor plate, 3 mm thick.
- A double peripheral reinforced rib.
- A network of central ribs.

The monolithic conception of Alucast panels enables to reach the levels of performance and accuracy required for high-tech applications

Coverings :
The Alucast panel, plain or perforated, is available with the following finishes :
- Vinyl
- Rubber.
The Alucast gratings (AF5 and AF6) are available rough or epoxy painted.

Dimensions :
Standard size: 600 mm

Options :
Range of perforations :
- Alucast PF 1 : Perforated panel, 7% free area.
- Alucast PF 2 : Perforated panel, 11% free area.
- Alucast PF 3 : Perforated panel, 15% free area.
- Alucast PF 4 : Perforated panel, 22% free area.
- Alucast AF 5 : Grating, 40% free area.
- Alucast AF 6 : Grating, 60% free area.

Fire classification:
Without covering, the Alucast panel is classed M0 (incombustible), by nature.

Electrical resistance :
It varies from 5x10⁵ to 2x10¹² ohms, depending on the properties of the covering.

Acoustic :

PDF Download :

Print this page :

Survey Institute : SOCOTEC CONSULTING.
All technical changes reserved without further notice.

Load classes according to NF EN 12825
and using safety factor = 2.0